Galaxy S10 S10e S10 Plus firmware download
Get links of stock ROMs Is here!
Samsung new flagship for the year 2019, the Galaxy S10 S10e S10 Plus, is a powerful device that comes with Exynos 9820/Snapdragon 855 chipset. Not only that, the software on the Galaxy S10 is quite good, Samsung’s best yet in One UI skin that runs Android 9 Pie at the base.
Despite that, though, you may run into software issues on your Galaxy S10. Whether that be because of a bad app, or any customization you may have tried, you can fix the software issues yourself by simply installing a firmware file.
That is why you must keep a firmware file of your device — for the exact variant — handy, saved on your PC, to go back to stock effortlessly, all by yourself. A firmware file also comes handy when you want to update your phone to latest software update available — particularly helpful if you are not getting OTA updates from the OEM.
On this page, you will find firmware file for various Galaxy S10 S10e S10 Plusvariants. You can easily install a firmware file using unofficial Samsung PC software called Odin, as provided in the guide below.
The Galaxy S10 S10e S10 Plus firmware files given here are 100% free to download and doesn’t require any subscription.
You can install any firmware for the model no. SM-G970U on your device as it doesn’t matter as long as the model no. remains the same.
Yes, this means that you can install a firmware file originally meant for T-Mobile or Verizon variant on your AT&T Galaxy S10 S10e S10 Plus, and vice versa. The only difference will be the extra apps (read: bloatware) that each carrier may out in or not put in, in which case, you are always better off AT&T firmware.
The other firmware files are as per your device’s model no., as usual, so just find your model no. on the box first, and then download the firmware given for that model no. in the table right below.
Note: You can install SM-G970U1 firmware on an SM-G970U device, but not vice-versa. Also, Canadian Galaxy S10+ comes with model no. SM-G970W, not U.
Galaxy S10 firmware download
G970USQU1ASAT | Android 9
Galaxy S10e firmware download
Galaxy S10PLUS firmware download
How to install a firmware
Let’s see how to install the firmware on your Galaxy S10. Make sure you have more than 30% battery on your device.
Step 1. Make sure you have downloaded the firmware on your PC. Search our site for it if you don’t have it already.
Step 2. Install Samsung USB driver (method 1 on the linked page) first of all. Double-click the .exe file of drivers to begin the installation. (Not required if you have already done this.)
Step 3. Also, download Odin PC software (latest version or patched version of 3.13).
Step 4. Extract the firmware file now. You can use free software like 7-zip for this. Install 7-zip, then right click on firmware file and under 7-zip, select ‘Extract here’. You should get files in .tar.md5 format now. (You may a bunch of files, and you will find text like AP, BL, CP or CSC etc. written at the beginning of those files.) We will be loading this file into Odin, to be installed on the device.
Step 5. Extract the Odin file. You should get the Odin exe file (other files could be hidden, hence not visible).
Step 6. Disconnect your Galaxy device from PC if it is connected.
Step 7. Boot your device into download mode:
- Power off your device. Wait for 6-7 seconds after the screen goes off.
- Press and hold the three buttons Volume down + Bixby + Power together until you see the Warning screen.
- If your device has a home button, use Volume down + Home + Power buttons combo.
- If your device doesn’t have a home or Bixby button, then use Volume down + Volume up + Power buttons combo.
- Press Volume Up to continue to download mode.
